What is the difference between fission and fusion?

Fission splits a heavy atomic nucleus into lighter nuclei, while fusion combines two light nuclei into a heavier one, releasing energy through different nuclear mechanisms.

Which releases more energy, fission or fusion?

Fusion releases roughly three to four times more energy per kilogram of fuel than fission, making it a far denser energy source for the same mass.

Is fusion safer than fission?

Yes, fusion is inherently safer because it requires precise conditions to sustain, so any disruption stops the reaction, unlike fission which needs active cooling to prevent meltdowns.

Which is more expensive to build, fission or fusion power plants?

Fusion is more expensive to build because it requires complex superconducting magnets and laser systems, whereas fission reactors use established, cheaper boiling-water or pressurized-water technology.

Can fission and fusion be used interchangeably for power generation?

No, they cannot be used interchangeably because fission is commercially viable today, while fusion remains experimental and has not yet achieved a net-positive energy output.

What is a common beginner mistake when learning about fission and fusion?

A common beginner mistake is confusing the fuel sources, as fission uses heavy elements like uranium or plutonium, while fusion uses light elements like hydrogen isotopes.

What is the real-world use case for fission energy?

Fission powers about 10% of global electricity through commercial nuclear reactors, providing steady, carbon-free baseload power in countries like the United States and France.

Can a fission reactor be switched to run on fusion fuel?

No, a fission reactor cannot be switched to fusion fuel because the reactor core, control rods, and coolant systems are designed specifically for splitting heavy atoms, not combining light ones.

What happens to the atoms during fission and fusion reactions?

During fission, a heavy atom like uranium-235 splits into smaller atoms like barium and krypton, while fusion forces hydrogen isotopes together to form helium, releasing neutrons in both processes.

Which process powers the sun, fission or fusion?

Fusion powers the sun, where immense gravity and heat fuse hydrogen nuclei into helium, generating the energy that sustains life on Earth.

Difference Between

Difference Between Fission and Fusion

Written byNex Virox Team

Editorial Team

Reviewed byVarshal Nirbhavane

Senior SEO & Organic Growth Professional · 5+ years

Published: August 29, 202617 min read

Quick answer

The main difference between Fission and Fusion is that fission splits a heavy atomic nucleus into lighter nuclei, while fusion combines light nuclei into a heavier one. Fission is the splitting of a large atom, while Fusion is the joining of small atoms.

Key takeaways

Core distinction: Fission splits heavy atomic nuclei, while fusion combines light nuclei into heavier ones.
Energy mechanics: Fusion releases several times more energy per kilogram of fuel than fission does.
Operational reality: Fission runs commercially today; fusion remains experimental and requires extreme temperatures.
Best-fit use: Fission powers nuclear plants and submarines; fusion promises cleaner future energy generation.
Common mistake: Confusing fusion's lack of chain reaction with fission's self-sustaining neutron-driven process.

Table of Contents18 sections

Difference Between Fission and Fusion: Comparison Table

Aspect	Fission	Fusion
Definition	Splits a heavy atomic nucleus, such as uranium-235, into two lighter nuclei.	Combines two light atomic nuclei, typically hydrogen isotopes, into a heavier nucleus.
Purpose	Generates commercial electricity in nuclear power plants and powers naval submarines.	Powers the Sun and stars; research aims to replicate it for clean terrestrial energy.
Core Mechanism	Neutron bombardment triggers nucleus splitting, releasing energy and additional neutrons.	Extreme heat and pressure force nuclei together, overcoming electrostatic repulsion.
Fuel Source	Uses heavy elements like uranium-235 or plutonium-239, mined and enriched.	Uses light elements like deuterium and tritium, extracted from seawater and lithium.
Fuel Abundance	Relies on finite uranium reserves concentrated in a few mining regions.	Deuterium from seawater is abundant; tritium is bred from lithium.
Energy Output	Releases roughly 200 MeV per fission event of uranium-235.	Releases about 17.6 MeV per deuterium-tritium fusion event.
Energy Density	One kilogram of uranium yields roughly 24,000,000 kWh of heat.	One kilogram of fusion fuel yields several times more energy than fission fuel.
Byproducts	Produces long-lived radioactive fission fragments like cesium-137 and strontium-90.	Produces helium and high-energy neutrons; no long-lived transuranic waste.
Radioactive Waste	Generates highly radioactive waste requiring secure storage for thousands of years.	Creates minimal radioactive waste; reactor components activate but decay within decades.
Operating Temperature	Operates at moderate temperatures around 300°C in typical water-cooled reactors.	Requires extreme temperatures exceeding 100 million °C for sustained plasma ignition.
Reaction Control	Controlled via control rods absorbing neutrons; chain reaction is manageable.	Plasma is inherently unstable; maintaining confinement is extraordinarily difficult.
Chain Reaction	Self-sustaining chain reaction requires careful moderation and neutron management.	No chain reaction occurs; reaction stops if plasma conditions degrade.
Meltdown Risk	Possible if cooling fails, leading to core meltdown and radioactive release.	Impossible; plasma loss simply extinguishes the reaction without residual heat.
Safety Profile	Requires multiple redundant safety systems and containment structures to prevent accidents.	Inherently safe; no runaway reaction or catastrophic failure mode exists.
Technology Maturity	Commercially deployed since the 1950s with over 400 operating reactors worldwide.	Still experimental; no commercial plant has achieved net positive energy output.
Commercial Status	Provides roughly 10% of global electricity through established nuclear power plants.	Not yet commercial; multiple international projects target demonstration by 2035.
Capital Cost	Typical plant construction costs range from $5 billion to $15 billion depending on design.	Prototype reactors like ITER cost over $20 billion with uncertain final economics.
Operational Cost	Fuel costs are low, but decommissioning and waste management add significant expense.	Fuel is nearly free, but exotic materials and maintenance drive high operational costs.
Startup Time	Reactor startup from cold shutdown typically takes several days to reach full power.	Plasma ignition can occur within seconds, but sustained operation remains unproven.
Reaction Speed	Fission events occur in microseconds; control systems respond within milliseconds.	Fusion reactions occur rapidly, but plasma dynamics evolve over milliseconds to seconds.
Power Density	Delivers high power density per reactor core volume, enabling compact plant designs.	Current experimental plasmas achieve lower power density than commercial fission cores.
Scalability	Scales from small submarine reactors to large 1,600 MW grid-connected plants.	Designs target large central plants; small modular fusion remains theoretical.
Maintenance Needs	Requires scheduled refueling outages every 18-24 months with robotic handling.	Neutron damage to reactor walls demands frequent remote maintenance and component replacement.
Fuel Availability	Uranium supply is geopolitically concentrated; prices fluctuate with mining output.	Deuterium is universally available from seawater; lithium reserves are widespread.
Proliferation Risk	Enrichment and reprocessing technologies can produce weapons-usable materials.	Fusion technology poses minimal proliferation risk; no fissile material involved.
Public Perception	Faces significant public opposition due to accident fears and waste disposal concerns.	Generally viewed favorably as clean energy, though awareness of technical hurdles is low.
Regulatory Hurdles	Subject to stringent licensing, safety reviews, and long permitting timelines.	Regulatory frameworks for fusion are still being developed in most jurisdictions.
Example Applications	Powers civilian grids, aircraft carriers, submarines, and research reactors.	Powers stars; experimental devices include tokamaks, stellarators, and inertial confinement.
Typical Users	Utilities, national governments, and military operators with specialized expertise.	Research consortia, national laboratories, and private fusion startups.
Best-Fit Scenario	Baseload electricity today where low-carbon, dispatchable power is needed immediately.	Future clean energy after breakeven and commercial viability are demonstrated.

What Is Fission?

Fission is a nuclear reaction where a heavy atomic nucleus splits into two or more smaller nuclei, releasing a large amount of energy. It occurs naturally in radioactive decay and is harnessed in nuclear power plants and weapons.

Definition of Fission

Fission is the process in which the nucleus of a heavy atom, such as uranium-235 or plutonium-239, absorbs a neutron and splits into lighter nuclei, accompanied by the emission of neutrons, gamma radiation, and approximately 200 MeV of energy per event.

Key Characteristics of Fission

Characteristic	What It Means in Practice
Heavy nucleus	Requires large atoms like uranium-235 or plutonium-239 to split effectively.
Neutron trigger	Needs an incoming neutron to initiate the split of the nucleus.
Energy release	Produces roughly 200 MeV per event, millions of times more than chemical reactions.
Fission fragments	Creates two lighter nuclei, typically with unequal mass distributions.
Neutron emission	Releases 2-3 free neutrons that can sustain a chain reaction.
Radioactive waste	Leaves behind highly radioactive fission products that remain hazardous for centuries.
Chain reaction	Emitted neutrons can split other nuclei, enabling sustained energy output.
Critical mass	Requires a minimum amount of fissile material to maintain a self-sustaining reaction.
Control rods	Needs boron or cadmium rods to absorb neutrons and regulate reaction rate.
Heat generation	Releases intense heat that is used to boil water and drive turbines for electricity.

Common Examples of Fission

Uranium-235 reactors – the most widely used fuel in commercial nuclear power plants worldwide.
Plutonium-239 weapons – the fissile core material in the Nagasaki-type atomic bomb.
Pressurized water reactors – the dominant reactor design in the US nuclear fleet.
Boiling water reactors – a simpler design that boils water directly in the reactor core.
Chernobyl RBMK reactor – a graphite-moderated design that failed catastrophically in 1986.
Natural fission reactors – the Oklo site in Gabon where uranium self-sustained fission 2 billion years ago.
Fast breeder reactors – convert non-fissile uranium-238 into plutonium-239 during operation.
Research reactors – small fission units used for neutron scattering and isotope production.
Naval propulsion reactors – compact fission cores that power submarines and aircraft carriers.
Californium-252 sources – spontaneously fissioning isotopes used in portable neutron detectors.

Advantages and Limitations of Fission

Advantages	Limitations
Produces massive energy per kilogram of fuel compared to coal or gas.	Creates radioactive waste that requires secure storage for tens of thousands of years.
Emits no carbon dioxide during electricity generation.	Carries catastrophic meltdown risk if cooling systems fail.
Provides reliable, continuous baseload power independent of weather.	Requires expensive, complex safety systems and regulatory oversight.
Uses a small fuel volume, reducing mining and transport footprints.	Poses nuclear proliferation risk if plutonium is diverted for weapons.
Operates for 18-24 months between refueling outages.	High upfront capital cost makes new plants financially risky.
Can be scaled to power entire cities from a single facility.	Produces long-lived isotopes like cesium-137 that contaminate land for generations.
Has a proven track record over 60 years of commercial operation.	Decommissioning old plants is extremely costly and slow.
Offers high energy density, roughly 10 million times that of oil.	Depends on finite uranium reserves that require global supply chains.
Supports medical isotope production for cancer diagnostics.	Thermal pollution from cooling water can harm local aquatic ecosystems.
Provides energy security by reducing reliance on imported fossil fuels.	Accident cleanup, as seen at Fukushima, can take decades and cost billions.

What Is Fusion?

Fusion is the process where two light atomic nuclei combine to form a heavier nucleus, releasing enormous energy. It powers the Sun and other stars, and scientists are working to replicate it on Earth for clean power generation.

Definition of Fusion

Fusion is a nuclear reaction in which two or more atomic nuclei of low mass, such as hydrogen isotopes, collide at high velocity and merge to form a single heavier nucleus, releasing binding energy proportional to the mass difference.

Key Characteristics of Fusion

Characteristic	What It Means in Practice
Light fuel	Uses hydrogen isotopes deuterium and tritium, which are abundant in seawater and lithium.
Extreme temperatures	Requires over 100 million degrees Celsius to overcome electrostatic repulsion between positively charged nuclei.
High energy yield	Releases roughly four times more energy per kilogram of fuel than fission reactions.
Plasma state	Fuel exists as ionised gas, confined by magnetic fields or inertial forces rather than solid containers.
Low radioactivity	Produces short-lived radioactive waste, mostly structural materials, not long-lived fission products.
No chain reaction	Reaction stops naturally if fuel supply or confinement fails, eliminating meltdown risk.
Helium product	Primary byproduct is helium, an inert and non-toxic gas that poses no environmental hazard.
Neutron output	High-energy neutrons activate reactor walls, requiring periodic replacement and remote handling.
Fuel abundance	Deuterium is extracted from seawater; tritium is bred from lithium in the reactor blanket.
Ignition challenge	Sustaining net energy gain requires precise plasma stability, a problem not yet fully solved.

Common Examples of Fusion

The Sun – fuses hydrogen into helium in its core, generating the heat and light that sustain life on Earth.
Hydrogen bomb – uses fusion of deuterium and tritium to release destructive explosive energy on a massive scale.
ITER reactor – an international tokamak in France designed to demonstrate sustained fusion energy production.
JET facility – the Joint European Torus in the UK set records for fusion energy output in controlled experiments.
NIF laser facility – uses inertial confinement with 192 lasers to compress fuel pellets and trigger fusion ignition.
Stellar nucleosynthesis – fusion in stars creates elements up to iron, distributing them across the universe.
Proton-proton chain – the dominant fusion pathway in Sun-like stars, converting hydrogen to helium over billions of years.
CNO cycle – a fusion process using carbon, nitrogen and oxygen catalysts, dominant in stars heavier than the Sun.
Tokamak reactors – doughnut-shaped magnetic confinement devices used in most experimental fusion power projects worldwide.
Stellarator devices – twisted magnetic confinement designs like Wendelstein 7-X that offer steady-state plasma operation.

Advantages and Limitations of Fusion

Advantages	Limitations
Fuel is virtually limitless, with deuterium extracted from seawater at low cost.	Sustaining fusion requires temperatures hotter than the Sun's core, which no solid material can withstand.
No carbon dioxide or greenhouse gas emissions are produced during the reaction itself.	Net energy gain has not yet been achieved commercially; all current reactors consume more power than they output.
Radioactive waste is short-lived, decaying to safe levels within about 100 years.	High-energy neutrons damage reactor walls, requiring frequent replacement of expensive components.
No risk of a runaway chain reaction or meltdown because the reaction self-extinguishes.	Commercial fusion plants remain decades away, with no operating timeline confirmed by any major project.
Fuel supply is geographically distributed, reducing geopolitical energy dependence.	Tritium fuel is radioactive and must be bred from lithium, adding complexity and cost to reactor design.
Energy density is exceptionally high, with one gram of fuel yielding massive output.	Maintaining plasma stability for extended periods remains an unsolved engineering challenge.
Byproducts are mostly helium, which is inert and harmless to the environment.	Construction costs for experimental reactors like ITER exceed tens of billions of dollars.
No fissile material is involved, reducing nuclear proliferation and security concerns.	Scaling from experimental success to grid-scale electricity generation has never been demonstrated.
Reaction can be shut down instantly by cutting fuel supply, offering operational safety.	Neutron radiation activates structural components, creating disposal challenges for decommissioned parts.
Fusion could provide baseload power without the intermittency problems of solar and wind.	Current plasma confinement times are measured in seconds, far short of the continuous operation needed.

Similarities Between Fission and Fusion

Shared Aspect	How Fission and Fusion Are Alike
Nuclear Reactions	Fission and fusion both alter atomic nuclei to release vast amounts of energy from matter.
Energy Source	Fission and fusion both derive usable power from the strong nuclear force binding subatomic particles.
Mass Conversion	Fission and fusion both convert a small fraction of mass into energy according to E=mc².
Atomic Physics	Fission and fusion both rely on quantum mechanics and nuclear binding energy principles for operation.
Primary Fuel	Fission and fusion both require specific isotopes of light or heavy elements as their primary fuel.
High Temperatures	Fission and fusion both operate at extreme temperatures to initiate and sustain their respective nuclear processes.
Energy Output	Fission and fusion both produce millions of times more energy per kilogram than chemical fuels.
Heat Generation	Fission and fusion both generate intense heat that can be captured to drive turbines for electricity.
Power Plants	Fission and fusion both aim to heat water into steam that spins generators in power stations.
Zero Carbon	Fission and fusion both emit no carbon dioxide during operation, making them clean energy sources.
Base Load	Fission and fusion both can provide continuous, reliable power independent of weather conditions.
Weapons Potential	Fission and fusion both have military applications for creating devastating explosive devices.
Radiation Emission	Fission and fusion both produce high-energy radiation requiring shielding to protect workers.
Neutron Release	Fission and fusion both emit fast neutrons as byproducts of their respective nuclear reactions.
Radioactive Waste	Fission and fusion both generate radioactive materials that require careful long-term management.
Safety Systems	Fission and fusion both demand robust containment structures and redundant safety mechanisms.
Regulatory Oversight	Fission and fusion both face strict government licensing and international nuclear safeguards.
Expert Workforce	Fission and fusion both require highly trained physicists, engineers and technicians for operation.
Capital Costs	Fission and fusion both require multi-billion-dollar investments for research and construction.
R&D History	Fission and fusion both emerged from 20th-century physics breakthroughs in atomic theory.
Public Concern	Fission and fusion both face public anxiety about safety, accidents and nuclear proliferation.
Fuel Handling	Fission and fusion both involve remote handling of radioactive fuel to protect personnel.
Cooling Needs	Fission and fusion both require substantial cooling systems to manage excess thermal load.
Energy Density	Fission and fusion both pack enormous energy into small fuel volumes compared to fossil fuels.
Plasma Physics	Fission and fusion both involve ionized matter and charged particle behavior in reactors.
International Research	Fission and fusion both benefit from global collaboration like ITER and national laboratories.
Decommissioning	Fission and fusion both require costly shutdown and dismantling procedures at end of life.
Monitoring Tools	Fission and fusion both use radiation detectors and sensors to track reaction stability.
Longevity Goals	Fission and fusion both target decades of operational life with periodic maintenance cycles.
Future Role	Fission and fusion both are viewed as key pillars for decarbonizing global electricity grids.

Fission or Fusion: Which Should You Choose?

The deciding variable is your timeline. Fission is the only practical choice today because fusion is not yet commercially viable. If you need power within the next decade, choose fission. If you are investing in long-term energy research for 2040 or beyond, fusion is the eventual goal.

When to Use Fission

Choose Fission when you need reliable, baseload power right now. Fission plants operate commercially in 32 countries, delivering 10% of global electricity. It suits budgets of $5-10 billion per plant, existing regulatory frameworks, and near-term carbon reduction targets that cannot wait for unproven technology.

When to Use Fusion

Choose Fusion when you prioritize zero long-lived radioactive waste and inherent safety. Fusion suits research institutions, government-funded projects, and investors with 20-year horizons. It requires massive capital, no operational profit yet, and tolerates experimental risk. Fusion promises limitless fuel from seawater but delivers zero grid power today.

Common Misconceptions About Fission and Fusion

Common Myth	The Reality
Fission and fusion are basically the same nuclear reaction.	Fission splits a heavy nucleus like uranium-235, while fusion combines light nuclei like hydrogen isotopes.
Fusion only happens inside hydrogen bombs and the Sun.	Fusion also occurs in stars, experimental tokamaks, and inertial confinement facilities like the National Ignition Facility.
Fission produces more energy per reaction than fusion.	Fusion releases roughly three to four times more energy per kilogram of fuel than fission does.
Fusion reactors are just scaled-up fission reactors.	Fusion reactors use magnetic or inertial confinement, while fission reactors rely on sustained neutron chain reactions.
Fission creates no radioactive waste at all.	Fission produces radioactive fission products and activated materials that require safe storage for thousands of years.
Fusion produces long-lived radioactive waste like fission does.	Fusion generates low-level radioactive waste from activated components, but no long-lived transuranic actinides like fission does.
Fission requires extremely high temperatures to start.	Fission starts at room temperature when a neutron strikes a fissile nucleus; fusion requires about 100 million degrees Celsius.
Fusion is a cold process that happens naturally on Earth.	Fusion needs extreme heat and pressure; natural fusion on Earth only occurs in lightning strikes or nuclear weapons.
Fission and fusion both use uranium as their primary fuel.	Fission uses uranium or plutonium; fusion primarily uses deuterium and tritium, which are hydrogen isotopes.
Fusion power has been commercially available for decades.	No fusion reactor has yet produced net electricity; commercial fusion is projected for the 2030s or later.
Fission reactors can explode like a nuclear bomb.	Fission reactors cannot detonate like weapons because their fuel concentration and geometry prevent a rapid uncontrolled chain reaction.
Fusion is always completely safe with zero risks.	Fusion carries operational risks like tritium leaks, but it has no meltdown risk because the reaction stops when confinement fails.
Fission was invented in the 20th century by scientists.	Fission was discovered in 1938 by Otto Hahn and Fritz Strassmann, not invented; it is a natural physical process.
Fusion only produces energy, never any particles.	Fusion produces high-energy neutrons and helium-4, which carry the released kinetic energy from the reaction.
Fission fuel is cheap and unlimited in supply.	Fission fuel like uranium-235 is finite; known reserves last roughly 80 to 100 years at current consumption rates.
Fusion fuel is rare and difficult to obtain.	Fusion fuel deuterium is abundant in seawater, but tritium is scarce and must be bred from lithium.
Fission and fusion both require critical mass to sustain.	Fission needs a critical mass of fissile material; fusion needs sufficient temperature, density, and confinement time instead.
Fusion happens spontaneously in ordinary water.	Fusion does not occur in water; deuterium in water requires extreme conditions like stellar cores or reactors to fuse.
Fission waste is harmless after just a few years.	Fission waste includes isotopes like cesium-137 and strontium-90 that remain hazardous for about 300 years.
Fusion is just a theoretical concept with no experiments.	Fusion has been demonstrated in hundreds of experiments, including JET, ITER, and NIF, achieving record energy outputs.
Fission releases energy by combining small atoms together.	Fission releases energy by splitting heavy atoms; combining small atoms is the mechanism of fusion, not fission.
Fusion reactors will produce unlimited energy for free.	Fusion still requires significant input energy for heating and confinement; net gain remains a major engineering challenge.
Fission is a renewable energy source like solar or wind.	Fission relies on finite uranium reserves, making it a non-renewable resource, unlike solar or wind energy.
Fusion creates no neutrons at all during operation.	Fusion of deuterium and tritium produces high-energy neutrons that activate reactor materials and require shielding.
Fission was first used for peaceful power before weapons.	Fission was first weaponized in 1945; the first commercial fission power plant began operation in 1954.
Fusion is the same process that powers nuclear submarines.	Nuclear submarines use fission reactors; fusion does not yet power any naval vessel or commercial grid.
Fission requires a chain reaction that is impossible to control.	Fission chain reactions are controlled daily in reactors using control rods and moderators to absorb excess neutrons.
Fusion will eliminate all radioactive waste completely.	Fusion produces activated structural materials, but it avoids long-lived actinides and high-level fission product waste.
Fission and fusion both occur naturally inside the Earth's core.	Fission contributes some heat in Earth's crust; fusion does not occur naturally inside Earth's core at all.
Fusion is easier to achieve than fission because fuel is abundant.	Fusion is harder to achieve than fission because sustaining 100 million degree plasma requires extreme engineering, despite abundant fuel.

Conclusion

Difference Between Fission and Fusion comes down to splitting versus joining atomic nuclei. Fission splits heavy atoms, powering nuclear plants. Fusion joins light atoms, fueling stars. Choose fission for proven, controllable energy today. Choose fusion for cleaner, virtually limitless power in the future.

FAQs on Difference Between Fission and Fusion

What is the difference between fission and fusion?: Fission splits a heavy atomic nucleus into lighter nuclei, while fusion combines two light nuclei into a heavier one, releasing energy through different nuclear mechanisms.
Which releases more energy, fission or fusion?: Fusion releases roughly three to four times more energy per kilogram of fuel than fission, making it a far denser energy source for the same mass.
Is fusion safer than fission?: Yes, fusion is inherently safer because it requires precise conditions to sustain, so any disruption stops the reaction, unlike fission which needs active cooling to prevent meltdowns.
Which is more expensive to build, fission or fusion power plants?: Fusion is more expensive to build because it requires complex superconducting magnets and laser systems, whereas fission reactors use established, cheaper boiling-water or pressurized-water technology.
Can fission and fusion be used interchangeably for power generation?: No, they cannot be used interchangeably because fission is commercially viable today, while fusion remains experimental and has not yet achieved a net-positive energy output.
What is a common beginner mistake when learning about fission and fusion?: A common beginner mistake is confusing the fuel sources, as fission uses heavy elements like uranium or plutonium, while fusion uses light elements like hydrogen isotopes.
What is the real-world use case for fission energy?: Fission powers about 10% of global electricity through commercial nuclear reactors, providing steady, carbon-free baseload power in countries like the United States and France.
Can a fission reactor be switched to run on fusion fuel?: No, a fission reactor cannot be switched to fusion fuel because the reactor core, control rods, and coolant systems are designed specifically for splitting heavy atoms, not combining light ones.
What happens to the atoms during fission and fusion reactions?: During fission, a heavy atom like uranium-235 splits into smaller atoms like barium and krypton, while fusion forces hydrogen isotopes together to form helium, releasing neutrons in both processes.
Which process powers the sun, fission or fusion?: Fusion powers the sun, where immense gravity and heat fuse hydrogen nuclei into helium, generating the energy that sustains life on Earth.